FEURER Gefahrgut Verpackungen Header

FEURER hazardous goods packaging

Packaging made of EPS.
Hazardous goods packaging from FEURER

Transport packaging made of EPS with a modular design

Get in touch

Hazardous goods packaging for defined transport requirements

Matching packaging to transport requirements

FEURER offers EPS hazardous goods packaging with a base, intermediate rings and a lid. Selection depends on the substance, inner packaging and intended transport route. The approval and instructions for use of the specific design type apply. Whether an additional outer carton can be omitted depends on the approved configuration.

FEURER Gefahrgut Verpackungen 02
FEURER Gefahrgut Verpackungen 01

Advantages of FEURER hazardous goods packaging

Use within the design type approval

  • Use is subject to the specifications of the applicable design type approval
  • The packing group, contents and mode of transport must be covered by the applicable approval

Flexible design

  • Modular system with base, intermediate rings and lid
  • Easily adaptable to different transport requirements

Efficient shipping

  • Configurations without an additional outer carton, where covered by the applicable approval
  • Temperature control and transport duration must be assessed for the specific packaging configuration and transport profile

Material and recovery

  • EPS packaging; recovery after use depends on factors including residues, material condition and available collection or recovery routes
FEURER Gefahrgut Wordl Star Winner 2019

Modular hazardous goods packaging made of EPS

Packaging configuration for the specific application

The base, intermediate rings and lid form a modular packaging system. The configuration is matched to the inner packaging, contents and transport conditions.

A configuration without an additional outer carton may only be used within the scope of the applicable design type approval. The components, closures and coolants required are determined for the specific application.

The close-fitting lid is secured with adhesive tape.
An intermediate ring adjusts the packaging height.
A partition separates the product from the coolant.
The contents are positioned inside the packaging.
FEURER Gefahrgut Verpackungen 04

Application areas subject to assessment of the specific requirements:

  • Pharmaceutical industry
    Packaging concepts for temperature-sensitive medicines and substances
  • Biotechnology
    Protection of sensitive laboratory samples and bioproducts
  • Chemical shipping
    Packaging selection according to substance properties and approved use
  • Laboratories
    Packaging concepts for hazardous substances and sample materials
Get in touch
FEURER Gefahrgut Verpackungen 03

EPS packaging: design and properties

  • Impact-resistant and robust
    The EPS material protects the hazardous goods from mechanical influences during transportation.
  • Insulating
    EPS provides thermal insulation. The required packaging configuration and coolants depend on the temperature range, transport duration and ambient conditions.
  • Space-saving and lightweight
    Configurations without an additional outer carton are possible within the scope of the applicable design type approval.
Get in touch

We are interested in insulated containers from FEURER

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
We would like to*
for recall
Data protection*
FEURER Sven Schaeufele

Your contact person

Sven Schäufele

T. +49 151 161 441 85