Accessories for FEURER insulated containers

ACCESSOIRIES

Cool pack

Cold packs reliably prolong resistance to temperature influences during transportation. Frozen produce, refrigerated goods and fresh produce remain fresh for even longer and frozen for a longer duration. The cold packs are compatible with Kängabox® and __blackline and are available for various temperature ranges. They are the professional’s eutectic plates.

Advantages at a glance:

Available in sizes GN 1/1, GN 1/2, GN 1/4, 60×40 cm
Temperature ranges:
+4 °C to +8 °C
+2 °C to +4 °C
-19°C to -13 °C
-24 °C to -18 °C
Freezing time: 24 hours
Reusable

To the Data Sheet

Hot pack

Hot packs are used to transport hot food: Simply heat in the oven and place inside the thermo box. Particularly practical if the thermo container is not filled to capacity. Meals remain hot for longer, and transportation time can be prolonged.

Advantages at a glance:

A practical alternative to the electric hot plate
Available in sizes GN 1/1, GN 1/2, GN 1/4, 60×40 cm
Warm-up time: 35 minutes at 85 °C
Reusable

To the Data Sheet

Cooling attachment

Cold packs are suspended in the cooling attachment and thus do not come into direct contact with the goods being transported. The cooling attachment is primarily recommended for the transportation of fresh fruit and vegetables and can be used as often as required.

Advantages at a glance:

Cooling frame compatible with insulated containers of the following sizes: GN 1/1, GN 1/2 and 60×40 cm
Optimal distribution of cold dissipation

To the Data Sheet

Stacking frame

This practical accessory permits the use of two different tiers. So that the temperature is maintained for a longer duration, a thermo container should always be filled to capacity. If there is insufficient space for the goods to be transported, the height of the box can be increased by 18 cm using the stacking frame.

Advantages at a glance:

Available in the following size: GN 1/1
Made from robust, sturdy EPP
Smooth inner surface

To the Data Sheet

Trolley

These aids help to transport heavy containers – also compatible with KÄNGABOX®Tower.

Advantages at a glance:

Suitable for the transportation of top-loaders and front-loaders
Suitable for insulated containers measuring GN 1/1 and 60×40 cm

To the Data Sheet

PACKAGING AND PACKAGING LOGISTICS FROM THE HOUSE OF FEURER

FEURER provides professional packaging and plastics processing solutions. The experienced packaging specialists develop customised solutions for every industry and every product, for every transportation route and every production process. The FEURER product portfolio spans the entire spectrum of packaging offerings: from load carriers – for instance, for the automotive industry – through co-packing and packaging for household appliances, right through to insulated containers and moulded parts.

Your plastic packaging specialist
As an experienced manufacturer of packaging and moulded parts made from EPP foam, FEURER offers industry intelligent solutions – precisely attuned to the requirements of the automotive sector, catering / cold chain logistics, the flat glass industry, healthcare/ pharma, the heating/air-conditioning sector, household appliances and cosmetics.

ACCESSOIRIES

Cool pack

Advantages at a glance:

Hot pack

Advantages at a glance:

Cooling attachment

Advantages at a glance:

Stacking frame

Advantages at a glance:

Trolley

Advantages at a glance:

PACKAGING AND PACKAGING LOGISTICS FROM THE HOUSE OF FEURER

Contact

Address